Ultimate glossary of crypto currency terms, acronyms and abbreviations
You've probably been hearing a lot about Bitcoin recently and are wondering what's the big deal? Most of your questions should be answered by the resources below but if you have additional questions feel free to ask them in the comments. It all started with the release of the release of Satoshi Nakamoto's whitepaper however that will probably go over the head of most readers so we recommend the following videos for a good starting point for understanding how bitcoin works and a little about its long term potential:
Limited Supply - There will only ever be 21,000,000 bitcoins created and they are issued in a predictable fashion, you can view the inflation schedule here. Once they are all issued Bitcoin will be truly deflationary. The halving countdown can be found here.
Open source - Bitcoin code is fully auditable. You can read the source code yourself here.
Accountable - The public ledger is transparent, all transactions are seen by everyone.
Decentralized - Bitcoin is globally distributed across thousands of nodes with no single point of failure and as such can't be shut down similar to how Bittorrent works. You can even run a node on a Raspberry Pi.
Censorship resistant - No one can prevent you from interacting with the bitcoin network and no one can censor, alter or block transactions that they disagree with, see Operation Chokepoint.
Push system - There are no chargebacks in bitcoin because only the person who owns the address where the bitcoins reside has the authority to move them.
Low fee scaling - On chain transaction fees depend on network demand and how much priority you wish to assign to the transaction. Most wallets calculate on chain fees automatically but you can view current fees here and mempool activity here. On chain fees may rise occasionally due to network demand, however instant micropayments that do not require confirmations are happening via the Lightning Network, a second layer scaling solution currently rolling out on the Bitcoin mainnet.
Borderless - No country can stop it from going in/out, even in areas currently unserved by traditional banking as the ledger is globally distributed.
Portable - Bitcoins are digital so they are easier to move than cash or gold. They can even be transported by simply memorizing a string of words for wallet recovery (while cool this method is generally not recommended due to potential for insecure key generation by inexperienced users. Hardware wallets are the preferred method for new users due to ease of use and additional security).
Bitcoin.org and BuyBitcoinWorldwide.com are helpful sites for beginners. You can buy or sell any amount of bitcoin (even just a few dollars worth) and there are several easy methods to purchase bitcoin with cash, credit card or bank transfer. Some of the more popular resources are below, also check out the bitcoinity exchange resources for a larger list of options for purchases.
Here is a listing of local ATMs. If you would like your paycheck automatically converted to bitcoin use Bitwage. Note: Bitcoins are valued at whatever market price people are willing to pay for them in balancing act of supply vs demand. Unlike traditional markets, bitcoin markets operate 24 hours per day, 365 days per year. Preev is a useful site that that shows how much various denominations of bitcoin are worth in different currencies. Alternatively you can just Google "1 bitcoin in (your local currency)".
Securing your bitcoins
With bitcoin you can "Be your own bank" and personally secure your bitcoins OR you can use third party companies aka "Bitcoin banks" which will hold the bitcoins for you.
If you prefer to "Be your own bank" and have direct control over your coins without having to use a trusted third party, then you will need to create your own wallet and keep it secure. If you want easy and secure storage without having to learn computer security best practices, then a hardware wallet such as the Trezor, Ledger or ColdCard is recommended. Alternatively there are many software wallet options to choose from here depending on your use case.
If you prefer to let third party "Bitcoin banks" manage your coins, try Gemini but be aware you may not be in control of your private keys in which case you would have to ask permission to access your funds and be exposed to third party risk.
Note: For increased security, use Two Factor Authentication (2FA) everywhere it is offered, including email! 2FA requires a second confirmation code to access your account making it much harder for thieves to gain access. Google Authenticator and Authy are the two most popular 2FA services, download links are below. Make sure you create backups of your 2FA codes.
As mentioned above, Bitcoin is decentralized, which by definition means there is no official website or Twitter handle or spokesperson or CEO. However, all money attracts thieves. This combination unfortunately results in scammers running official sounding names or pretending to be an authority on YouTube or social media. Many scammers throughout the years have claimed to be the inventor of Bitcoin. Websites like bitcoin(dot)com and the btc subreddit are active scams. Almost all altcoins (shitcoins) are marketed heavily with big promises but are really just designed to separate you from your bitcoin. So be careful: any resource, including all linked in this document, may in the future turn evil. Don't trust, verify. Also as they say in our community "Not your keys, not your coins".
Where can I spend bitcoins?
Check out spendabit or bitcoin directory for millions of merchant options. Also you can spend bitcoin anywhere visa is accepted with bitcoin debit cards such as the CashApp card. Some other useful site are listed below.
Mining bitcoins can be a fun learning experience, but be aware that you will most likely operate at a loss. Newcomers are often advised to stay away from mining unless they are only interested in it as a hobby similar to folding at home. If you want to learn more about mining you can read more here. Still have mining questions? The crew at /BitcoinMining would be happy to help you out. If you want to contribute to the bitcoin network by hosting the blockchain and propagating transactions you can run a full node using this setup guide. If you would prefer to keep it simple there are several good options. You can view the global node distribution here.
Just like any other form of money, you can also earn bitcoins by being paid to do a job.
You can also earn bitcoins by participating as a market maker on JoinMarket by allowing users to perform CoinJoin transactions with your bitcoins for a small fee (requires you to already have some bitcoins.
The following is a short list of ongoing projects that might be worth taking a look at if you are interested in current development in the bitcoin space.
One Bitcoin is quite large (hundreds of £/$/€) so people often deal in smaller units. The most common subunits are listed below:
one bitcoin is equal to 100 million satoshis
1,000 per bitcoin
used as default unit in recent Electrum wallet releases
1,000,000 per bitcoin
colloquial "slang" term for microbitcoin (μBTC)
100,000,000 per bitcoin
smallest unit in bitcoin, named after the inventor
For example, assuming an arbitrary exchange rate of $10000 for one Bitcoin, a $10 meal would equal:
For more information check out the Bitcoin units wiki. Still have questions? Feel free to ask in the comments below or stick around for our weekly Mentor Monday thread. If you decide to post a question in /Bitcoin, please use the search bar to see if it has been answered before, and remember to follow the community rules outlined on the sidebar to receive a better response. The mods are busy helping manage our community so please do not message them unless you notice problems with the functionality of the subreddit. Note: This is a community created FAQ. If you notice anything missing from the FAQ or that requires clarification you can edit it here and it will be included in the next revision pending approval. Welcome to the Bitcoin community and the new decentralized economy!
Microsoft patent 2020-060606 linking human brain to crypto payment system
Microsoft filed a patent 2020-060606 on June 20, 2019 for the link between the human body and the crypto payment system. It is a cryptocurrency mining system that uses human pulses such as brain waves and body heat to perform online tasks such as using search engines, chatbots, and reading ads. "A user can solve the arithmetically difficult problem unconsciously," says the patent. In fact, this is a very brief description of a brain computer interface, which can read and write electromagnetic signals from the brain at such a finely meshed level that the brain literally becomes a biocomputer in a network. To understand that, please watch the video below and read on below. This is necessary so that you understand the current technological state of affairs. Steve Hoffman - Brain Hacking & MindTech - Produced by DingDingTV How cryptocurrency works The aim is that we are collectively hung in a hyve mind and it seems that what with crpyo-currency like Bitcoin still had to be done on energy-guzzling mining servers, can now be filled in by the “human bio-computer”. The unique thing about blockchain payment systems was that as soon as you took a so-called wallet into the network, your computer formed a block in the network, where your computer receives a kind of calculation program that calculates the security key of a coin. All computers on the network must then come up with the same key as confirmation. If the entire network sees a transaction of a coin, all those keys are checked and if one is different, the transaction is illegal and rejected. That would create unhackable security. The problem, however, is that Bitcoin mining requires a lot of computing power and that requires electricity. That's why Bitcoin mining ended up being one of the most energy-guzzling industries in the world. The Microsoft patent seems to aim at making this blockchain principle, which is not only very energy-guzzling, but also puts a heavy burden on the internet in terms of bandwidth (after all, all computers in the chain must always be checked for positive encryption), superfluous to make. Simply put: Microsoft wants to use the human brain as a block in the blockchain. The 5G network will provide sufficient bandwidth to realize this. Link digital ID, vaccination ID and social credit system: The coronavirus pandemic provides the perfect alibi for the introduction of such a system. In concrete terms, this means that a score of your behavior (expressed in points) will initially be kept in the cloud. If you stick to the rules, you can take public transport or plane. If you don't follow the rules, your score will go down. The upcoming social distancing apps are a precursor to such a behavioral scoring system. After all, if you do not keep enough distance from potential infections, you have to quarantine at home. We also see China taking the lead there. Watch the video below and then read on. Wuhan coronavirus covid-19 totalitarian UN propaganda? Although Bill Gates officially retired from Microsoft's board this year, we can guess who the big driving force behind patent 2020-060606 is. Of course, I need not point out to the attentive reader that we recognize here the Biblical number of the mark of the beast from the Bible book of Revelation: 666. It states that the time will come when no one will be able to buy or sell without to bear 'the beast'. This under the statement that this number is six hundred and sixty-six. The same Bill Gates is behind the ID2020 initiative that wants to develop a digital ID for vaccination registration. If you combine such a digital ID hallmark with a digital passport (ID) and with patent 2020-060606, then you have completely enslaved people. Revelation 13: 16-18 16: And it causes it to give a mark to all, small and great, and rich and poor, and free and servants, on their right hand or on their foreheads; 17: And that no one should buy or sell except he who has that mark, or the name of the beast, or the number of his name. 18: Here is wisdom: let him that have understanding count the number of the beast; for the number of a man is, and his number is six hundred sixty and six. The "Official Gazette of the Kingdom of the Netherlands" announced on March 31, 2020 (“coincidentally”) change in law that allows a digital ID. Translated: Kingdom Act of 6 March 2020 amending the Passport Act in connection with the introduction of electronic identification with a public identification means and the expansion of the basic register of travel documents. We Willem-Alexander, by the grace of God, King of the Netherlands, Prince of Oranje-Nassau, etc. etc. etc. All who will see or hear it read, salute! do to know: Thus We have considered that it is desirable to amend the Passport Act in connection with the introduction of electronic identification with a public means and the extension of the basic register of travel documents; The consequences: So if we don't wake up in masses now and discover that we are witnessing a Psychological Operation that fully complies with the master script, then there is no escape. Then we cannot buy or sell anything if we do not meet all the requirements of the state. And to all, it really means all. Making a minor offense once has immediate consequences. Not cooperating with the vaccination obligation (think Bill Gates) will definitely mean the end of being able to travel and participate in society at all. You should consider the most basic things such as being able to buy food and drink. We must step out of our programming and know that we are sovereign. Please read the article from the official journal above again. In it you see that you can fully rely on your consciousness sovereignty. You are sovereign by nature and no law can bind you to anything. It says "We Willem-Alexander, by the grace of God". Now let him prove "that grace of God". Every law is signed by the king by the grace of God. There is no evidence whatsoever of this and so the law does not apply. The only problem is the fact that social systems have built up around that grace of God, to which many swear allegiance. Do we sit back and relax until we are swallowed up by the system of "the internet of things" by the grace of God, or do we activate ourselves to concrete things? Concrete matters means that we have to switch from passive to active and discover who we are in potential and in essence.
This is a follow-up on https://old.reddit.com/Bitcoin/comments/hqzp14/technical_the_path_to_taproot_activation/ Taproot! Everybody wants it!! But... you might ask yourself: sure, everybody else wants it, but why would I, sovereign Bitcoin HODLer, want it? Surely I can be better than everybody else because I swapped XXX fiat for Bitcoin unlike all those nocoiners? And it is important for you to know the reasons why you, o sovereign Bitcoiner, would want Taproot activated. After all, your nodes (or the nodes your wallets use, which if you are SPV, you hopefully can pester to your wallet vendoimplementor about) need to be upgraded in order for Taproot activation to actually succeed instead of becoming a hot sticky mess. First, let's consider some principles of Bitcoin.
You the HODLer should be the one who controls where your money goes. Your keys, your coins.
You the HODLer should be able to coordinate and make contracts with other people regarding your funds.
You the HODLer should be able to do the above without anyone watching over your shoulder and judging you.
I'm sure most of us here would agree that the above are very important principles of Bitcoin and that these are principles we would not be willing to remove. If anything, we would want those principles strengthened (especially the last one, financial privacy, which current Bitcoin is only sporadically strong with: you can get privacy, it just requires effort to do so). So, how does Taproot affect those principles?
Taproot and Your /Coins
Most HODLers probably HODL their coins in singlesig addresses. Sadly, switching to Taproot would do very little for you (it gives a mild discount at spend time, at the cost of a mild increase in fee at receive time (paid by whoever sends to you, so if it's a self-send from a P2PKH or bech32 address, you pay for this); mostly a wash). (technical details: a Taproot output is 1 version byte + 32 byte public key, while a P2WPKH (bech32 singlesig) output is 1 version byte + 20 byte public key hash, so the Taproot output spends 12 bytes more; spending from a P2WPKH requires revealing a 32-byte public key later, which is not needed with Taproot, and Taproot signatures are about 9 bytes smaller than P2WPKH signatures, but the 32 bytes plus 9 bytes is divided by 4 because of the witness discount, so it saves about 11 bytes; mostly a wash, it increases blockweight by about 1 virtual byte, 4 weight for each Taproot-output-input, compared to P2WPKH-output-input). However, as your HODLings grow in value, you might start wondering if multisignature k-of-n setups might be better for the security of your savings. And it is in multisignature that Taproot starts to give benefits! Taproot switches to using Schnorr signing scheme. Schnorr makes key aggregation -- constructing a single public key from multiple public keys -- almost as trivial as adding numbers together. "Almost" because it involves some fairly advanced math instead of simple boring number adding, but hey when was the last time you added up your grocery list prices by hand huh? With current P2SH and P2WSH multisignature schemes, if you have a 2-of-3 setup, then to spend, you need to provide two different signatures from two different public keys. With Taproot, you can create, using special moon math, a single public key that represents your 2-of-3 setup. Then you just put two of your devices together, have them communicate to each other (this can be done airgapped, in theory, by sending QR codes: the software to do this is not even being built yet, but that's because Taproot hasn't activated yet!), and they will make a single signature to authorize any spend from your 2-of-3 address. That's 73 witness bytes -- 18.25 virtual bytes -- of signatures you save! And if you decide that your current setup with 1-of-1 P2PKH / P2WPKH addresses is just fine as-is: well, that's the whole point of a softfork: backwards-compatibility; you can receive from Taproot users just fine, and once your wallet is updated for Taproot-sending support, you can send to Taproot users just fine as well! (P2WPKH and P2WSH -- SegWit v0 -- addresses start with bc1q; Taproot -- SegWit v1 --- addresses start with bc1p, in case you wanted to know the difference; in bech32 q is 0, p is 1) Now how about HODLers who keep all, or some, of their coins on custodial services? Well, any custodial service worth its salt would be doing at least 2-of-3, or probably something even bigger, like 11-of-15. So your custodial service, if it switched to using Taproot internally, could save a lot more (imagine an 11-of-15 getting reduced from 11 signatures to just 1!), which --- we can only hope! --- should translate to lower fees and better customer service from your custodial service! So I think we can say, very accurately, that the Bitcoin principle --- that YOU are in control of your money --- can only be helped by Taproot (if you are doing multisignature), and, because P2PKH and P2WPKH remain validly-usable addresses in a Taproot future, will not be harmed by Taproot. Its benefit to this principle might be small (it mostly only benefits multisignature users) but since it has no drawbacks with this (i.e. singlesig users can continue to use P2WPKH and P2PKH still) this is still a nice, tidy win! (even singlesig users get a minor benefit, in that multisig users will now reduce their blockchain space footprint, so that fees can be kept low for everybody; so for example even if you have your single set of private keys engraved on titanium plates sealed in an airtight box stored in a safe buried in a desert protected by angry nomads riding giant sandworms because you're the frickin' Kwisatz Haderach, you still gain some benefit from Taproot) And here's the important part: if P2PKH/P2WPKH is working perfectly fine with you and you decide to never use Taproot yourself, Taproot will not affect you detrimentally. First do no harm!
Taproot and Your Contracts
No one is an island, no one lives alone. Give and you shall receive. You know: by trading with other people, you can gain expertise in some obscure little necessity of the world (and greatly increase your productivity in that little field), and then trade the products of your expertise for necessities other people have created, all of you thereby gaining gains from trade. So, contracts, which are basically enforceable agreements that facilitate trading with people who you do not personally know and therefore might not trust. Let's start with a simple example. You want to buy some gewgaws from somebody. But you don't know them personally. The seller wants the money, you want their gewgaws, but because of the lack of trust (you don't know them!! what if they're scammers??) neither of you can benefit from gains from trade. However, suppose both of you know of some entity that both of you trust. That entity can act as a trusted escrow. The entity provides you security: this enables the trade, allowing both of you to get gains from trade. In Bitcoin-land, this can be implemented as a 2-of-3 multisignature. The three signatories in the multisgnature would be you, the gewgaw seller, and the escrow. You put the payment for the gewgaws into this 2-of-3 multisignature address. Now, suppose it turns out neither of you are scammers (whaaaat!). You receive the gewgaws just fine and you're willing to pay up for them. Then you and the gewgaw seller just sign a transaction --- you and the gewgaw seller are 2, sufficient to trigger the 2-of-3 --- that spends from the 2-of-3 address to a singlesig the gewgaw seller wants (or whatever address the gewgaw seller wants). But suppose some problem arises. The seller gave you gawgews instead of gewgaws. Or you decided to keep the gewgaws but not sign the transaction to release the funds to the seller. In either case, the escrow is notified, and if it can sign with you to refund the funds back to you (if the seller was a scammer) or it can sign with the seller to forward the funds to the seller (if you were a scammer). Taproot helps with this: like mentioned above, it allows multisignature setups to produce only one signature, reducing blockchain space usage, and thus making contracts --- which require multiple people, by definition, you don't make contracts with yourself --- is made cheaper (which we hope enables more of these setups to happen for more gains from trade for everyone, also, moon and lambos). (technology-wise, it's easier to make an n-of-n than a k-of-n, making a k-of-n would require a complex setup involving a long ritual with many communication rounds between the n participants, but an n-of-n can be done trivially with some moon math. You can, however, make what is effectively a 2-of-3 by using a three-branch SCRIPT: either 2-of-2 of you and seller, OR 2-of-2 of you and escrow, OR 2-of-2 of escrow and seller. Fortunately, Taproot adds a facility to embed a SCRIPT inside a public key, so you can have a 2-of-2 Taprooted address (between you and seller) with a SCRIPT branch that can instead be spent with 2-of-2 (you + escrow) OR 2-of-2 (seller + escrow), which implements the three-branched SCRIPT above. If neither of you are scammers (hopefully the common case) then you both sign using your keys and never have to contact the escrow, since you are just using the escrow public key without coordinating with them (because n-of-n is trivial but k-of-n requires setup with communication rounds), so in the "best case" where both of you are honest traders, you also get a privacy boost, in that the escrow never learns you have been trading on gewgaws, I mean ewww, gawgews are much better than gewgaws and therefore I now judge you for being a gewgaw enthusiast, you filthy gewgawer).
Taproot and Your Contracts, Part 2: Cryptographic Boogaloo
Now suppose you want to buy some data instead of things. For example, maybe you have some closed-source software in trial mode installed, and want to pay the developer for the full version. You want to pay for an activation code. This can be done, today, by using an HTLC. The developer tells you the hash of the activation code. You pay to an HTLC, paying out to the developer if it reveals the preimage (the activation code), or refunding the money back to you after a pre-agreed timeout. If the developer claims the funds, it has to reveal the preimage, which is the activation code, and you can now activate your software. If the developer does not claim the funds by the timeout, you get refunded. And you can do that, with HTLCs, today. Of course, HTLCs do have problems:
Privacy. Everyone scraping the Bitcoin blockchain can see any HTLCs, and preimages used to claim them.
This can be mitigated by using offchain techniques so HTLCs are never published onchain in the happy case. Lightning would probably in practice be the easiest way to do this offchain. Of course, there are practical limits to what you can pay on Lightning. If you are buying something expensive, then Lightning might not be practical. For example, the "software" you are activating is really the firmware of a car, and what you are buying is not the software really but the car itself (with the activation of the car firmware being equivalent to getting the car keys).
Even offchain techniques need an onchain escape hatch in case of unresponsiveness! This means that, if something bad happens during payment, the HTLC might end up being published onchain anyway, revealing the fact that some special contract occurred.
And an HTLC that is claimed with a preimage onchain will also publicly reveal the preimage onchain. If that preimage is really the activation key of a software than it can now be pirated. If that preimage is really the activation key for your newly-bought cryptographic car --- well, not your keys, not your car!
Trust requirement. You are trusting the developer that it gives you the hash of an actual valid activation key, without any way to validate that the activation key hidden by the hash is actually valid.
Fortunately, with Schnorr (which is enabled by Taproot), we can now use the Scriptless Script constuction by Andrew Poelstra. This Scriptless Script allows a new construction, the PTLC or Pointlocked Timelocked Contract. Instead of hashes and preimages, just replace "hash" with "point" and "preimage" with "scalar". Or as you might know them: "point" is really "public key" and "scalar" is really a "private key". What a PTLC does is that, given a particular public key, the pointlocked branch can be spent only if the spender reveals the private key of the given public key to you. Another nice thing with PTLCs is that they are deniable. What appears onchain is just a single 2-of-2 signature between you and the developemanufacturer. It's like a magic trick. This signature has no special watermarks, it's a perfectly normal signature (the pledge). However, from this signature, plus some datta given to you by the developemanufacturer (known as the adaptor signature) you can derive the private key of a particular public key you both agree on (the turn). Anyone scraping the blockchain will just see signatures that look just like every other signature, and as long as nobody manages to hack you and get a copy of the adaptor signature or the private key, they cannot get the private key behind the public key (point) that the pointlocked branch needs (the prestige). (Just to be clear, the public key you are getting the private key from, is distinct from the public key that the developemanufacturer will use for its funds. The activation key is different from the developer's onchain Bitcoin key, and it is the activation key whose private key you will be learning, not the developer's/manufacturer's onchain Bitcoin key). So:
Privacy: PTLCs are private even if done onchain. Nobody else can learn what the private key behind the public key is, except you who knows the adaptor signature that when combined with the complete onchain signature lets you know what the private key of the activation key is. Somebody scraping the blockchain will not learn the same information even if all PTLCs are done onchain!
Lightning is still useful for reducing onchain use, and will also get PTLCs soon after Taproot is activated, but even if something bad happens and a PTLC has to go onchain, it doesn't reveal anything!
Trust issues can be proven more easily with a public-private keypair than with a hash-preimage pair.
For example, the developer of the software you are buying could provide a signature signing a message saying "unlock access to the full version for 1 day". You can check if feeding this message and signature to the program will indeed unlock full-version access for 1 day. Then you can check if the signature is valid for the purported pubkey whose private key you will pay for. If so, you can now believe that getting the private key (by paying for it in a PTLC) would let you generate any number of "unlock access to the full version for 1 day" message+signatures, which is equivalent to getting full access to the software indefinitely.
For the car, the manufacturer can show that signing a message "start the engine" and feeding the signature to the car's fimrware will indeed start the engine, and maybe even let you have a small test drive. You can then check if the signature is valid for the purported pubkey whose privkey you will pay for. If so, you can now believe that gaining knowledge of the privkey will let you start the car engine at any time you want.
(pedantry: the signatures need to be unique else they could be replayed, this can be done with a challenge-response sequence for the car, where the car gathers entropy somehow (it's a car, it probably has a bunch of sensors nowadays so it can get entropy for free) and uses the gathered entropy to challenge you to sign a random number and only start if you are able to sign the random number; for the software, it could record previous signatures somewhere in the developer's cloud server and refuse to run if you try to replay a previously-seen signature.)
Taproot lets PTLCs exist onchain because they enable Schnorr, which is a requirement of PTLCs / Scriptless Script. (technology-wise, take note that Scriptless Script works only for the "pointlocked" branch of the contract; you need normal Script, or a pre-signed nLockTimed transaction, for the "timelocked" branch. Since Taproot can embed a script, you can have the Taproot pubkey be a 2-of-2 to implement the Scriptless Script "pointlocked" branch, then have a hidden script that lets you recover the funds with an OP_CHECKLOCKTIMEVERIFY after the timeout if the seller does not claim the funds.)
Now if you were really paying attention, you might have noticed this parenthetical:
(technical details: a Taproot output is 1 version byte + 32 byte public key, while a P2WPKH (bech32 singlesig) output is 1 version byte + 20 byte public key hash...)
So wait, Taproot uses raw 32-byte public keys, and not public key hashes? Isn't that more quantum-vulnerable?? Well, in theory yes. In practice, they probably are not. It's not that hashes can be broken by quantum computes --- they're still not. Instead, you have to look at how you spend from a P2WPKH/P2PKH pay-to-public-key-hash. When you spend from a P2PKH / P2WPKH, you have to reveal the public key. Then Bitcoin hashes it and checks if this matches with the public-key-hash, and only then actually validates the signature for that public key. So an unconfirmed transaction, floating in the mempools of nodes globally, will show, in plain sight for everyone to see, your public key. (public keys should be public, that's why they're called public keys, LOL) And if quantum computers are fast enough to be of concern, then they are probably fast enough that, in the several minutes to several hours from broadcast to confirmation, they have already cracked the public key that is openly broadcast with your transaction. The owner of the quantum computer can now replace your unconfirmed transaction with one that pays the funds to itself. Even if you did not opt-in RBF, miners are still incentivized to support RBF on RBF-disabled transactions. So the extra hash is not as significant a protection against quantum computers as you might think. Instead, the extra hash-and-compare needed is just extra validation effort. Further, if you have ever, in the past, spent from the address, then there exists already a transaction indelibly stored on the blockchain, openly displaying the public key from which quantum computers can derive the private key. So those are still vulnerable to quantum computers. For the most part, the cryptographers behind Taproot (and Bitcoin Core) are of the opinion that quantum computers capable of cracking Bitcoin pubkeys are unlikely to appear within a decade or two.
Current quantum computers can barely crack prime factorization problem for primes of 5 bits.
The 256-bit elliptic curve use by Bitcoin is, by my (possibly wrong) understanding, equivalent to 4096-bit primes, so you can see a pretty big gap between now (5 bit primes) and what is needed (4096 bit primes).
A lot of financial non-Bitcoin systems use the equivalent of 3072-bit primes or less, and are probably easier targets to crack than the equivalent-to-4096-bit-primes Bitcoin.
Quantum computers capable of cracking Bitcoin are still far off.
Pay-to-public-key-hash is not as protective as you might think.
We will probably see banks get cracked before Bitcoin, so the banking system is a useful canary-in-a-coal-mine to see whether we should panic about being quantum vulnerable.
For now, the homomorphic and linear properties of elliptic curve cryptography provide a lot of benefits --- particularly the linearity property is what enables Scriptless Script and simple multisignature (i.e. multisignatures that are just 1 signature onchain). So it might be a good idea to take advantage of them now while we are still fairly safe against quantum computers. It seems likely that quantum-safe signature schemes are nonlinear (thus losing these advantages).
If you are a singlesig HODL-only Bitcoin user, Taproot will not affect you positively or negatively. Importantly: Taproot does no harm!
If you use or intend to use multisig, Taproot will be a positive for you.
If you transact onchain regularly using typical P2PKH/P2WPKH addresses, you get a minor reduction in feerates since multisig users will likely switch to Taproot to get smaller tx sizes, freeing up blockspace for yours.
If you are using multiparticipant setups for special systems of trade, Taproot will be a positive for you.
Remember: Lightning channels are multipartiicpiant setups for special systems of lightning-fast offchain trades!
I Wanna Be The Taprooter!
So, do you want to help activate Taproot? Here's what you, mister sovereign Bitcoin HODLer, can do!
If you have developer experience especially in C, C++, or related languages
Review the Taproot code! There is one pull request in Bitcoin Core, and one in libsecp256k1. I deliberately am not putting links here, to avoid brigades of nontechnical but enthusiastic people leaving pointless reviews, but if you are qualified you know how to find them!
But I am not a cryptographeBitcoin Core contributomathematician/someone as awesome as Pieter Wuille
That's perfectly fine! The cryptographers have been over the code already and agree the math is right and the implementation is right. What is wanted is the dreary dreary dreary software engineering: are the comments comprehensive and understandable? no misspellings in the comments? variable names understandable? reasonable function naming convention? misleading coding style? off-by-one errors in loops? conditions not covered by tests? accidental mixups of variables with the same types? missing frees? read-before-init? better test coverage of suspicious-looking code? missing or mismatching header guards? portability issues? consistent coding style? you know, stuff any coder with a few years of experience in coding anything might be able to catch. With enough eyes all bugs are shallow!
If you are running a mining pool/mining operation/exchange/custodial service/SPV server
Be prepared to upgrade!
One of the typical issues with upgrading software is that subtle incompatibilities with your current custom programs tend to arise, disrupting operations and potentially losing income due to downtime. If so, consider moving to the two-node setup suggested by gmax, which is in the last section of my previous post. With this, you have an up-to-date "public" node and a fixed-version "private" node, with the public node protecting the private node from any invalid chainsplits or invalid transactions. Moving to this setup from a typical one-node setup should be smooth and should not disrupt operations (too much).
If you are running your own fullnode for fun or for your own wallet
Be prepared to upgrade! The more nodes validating the new rules (even if you are a non-mining node!), the safer every softfork will be!
If you are using an SPV wallet or custodial wallet/service (including hardware wallets using the software of the wallet provider)
Contact your wallet provider / SPV server and ask for a statement on whether they support Taproot, and whether they are prepared to upgrade for Taproot! Make it known to them that Taproot is something you want!
But I Hate Taproot!!
Raise your objections to Taproot now, or forever hold your peace! Maybe you can raise them here and some of the devs (probably nullc, he goes everywhere, even in rbtc!) might be able to see your objections! Or if your objections are very technical, head over to the appropriate pull request and object away!
Maybe you simply misunderstand something, and we can clarify it here!
Or maybe you do have a good objection, and we can make Taproot better by finding a solution for it!
Taproot! Everybody wants to have it, somebody wants to make it, nobody knows how to get it! (If you are asking why everybody wants it, see: Technical: Taproot: Why Activate?) (Pedants: I mostly elide over lockin times) Briefly, Taproot is that neat new thing that gets us:
Multisignatures (n-of-n, k-of-n) that are just 1 signature (1-of-1) in length!! (MuSig/Schnorr)
Better privacy!! If all contract participants can agree, just use a multisignature. If there is a dispute, show the contract publicly and have the Bitcoin network resolve it (Taproot/MAST).
Activation lets devs work get back to work on the even newer stuff like!!!
Cross-input signature aggregation!! (transaction with multiple inputs can have a single signature for all inputs) --- needs Schnorr, but some more work needed to ensure that the interactions with SCRIPT are okay.
Block validation - Schnorr signatures for all taproot spends in a block can be validated in a single operation instead of for each transaction!! Speed up validation and maybe we can actually afford to increase block sizes (maybe)!!
SIGHASH_ANYPREVOUT - you know, for Decker-Russell-Osuntokun ("eltoo") magic!!!
OP_CHECKTEMPLATEVERIFY - vaulty vaults without requiring storing signatures, just transaction details!!
So yes, let's activate taproot!
The SegWit Wars
The biggest problem with activating Taproot is PTSD from the previous softfork, SegWit. Pieter Wuille, one of the authors of the current Taproot proposal, has consistently held the position that he will not discuss activation, and will accept whatever activation process is imposed on Taproot. Other developers have expressed similar opinions. So what happened with SegWit activation that was so traumatic? SegWit used the BIP9 activation method. Let's dive into BIP9!
bit - A field in the block header, the nVersion, has a number of bits. By setting a particular bit, the miner making the block indicates that it has upgraded its software to support a particular soft fork. The bit parameter for a BIP9 activation is which bit in this nVersion is used to indicate that the miner has upgraded software for a particular soft fork.
timeout - a time limit, expressed as an end date. If this timeout is reached without sufficient number of miners signaling that they upgraded, then the activation fails and Bitcoin Core goes back to the drawing board.
Now there are other parameters (name, starttime) but they are not anywhere near as important as the above two. A number that is not a parameter, is 95%. Basically, activation of a BIP9 softfork is considered as actually succeeding if at least 95% of blocks in the last 2 weeks had the specified bit in the nVersion set. If less than 95% had this bit set before the timeout, then the upgrade fails and never goes into the network. This is not a parameter: it is a constant defined by BIP9, and developers using BIP9 activation cannot change this. So, first some simple questions and their answers:
Why not just set a day when everyone starts imposing the new rules of the softfork?
This was done classically (in the days when Satoshi was still among us). But this might argued to put too much power to developers, since there would be no way to reject an upgrade without possible bad consequences. For example, developers might package an upgrade that the users do not want, together with vital security bugfixes. Either you live without vital security bugfixes and hire some other developers to fix it for you (which can be difficult, presumably the best developers are already the ones working on the codebase) or you get the vital security bugfixes and implicitly support the upgrade you might not want.
Sure, you could fork the code yourself (the ultimate threat in the FOSS world) and hire another set of developers who aren't assholes to do the dreary maintenance work of fixing security bugs, but Bitcoin needs strong bug-for-bug compatibility so everyone should really congregate around a single codebase.
Basically: even the devs do not want this power, because they fear being coerced into putting "upgrades" that are detrimental to users. Satoshi got a pass because nobody knew who he was and how to coerce him.
Suppose the threshold were lower, like 51%. If so, after activation, somebody can disrupt the Bitcoin network by creating a transaction that is valid under the pre-softfork rules, but are invalid under the post-softfork rules. Upgraded nodes would reject it, but 49% of miners would accept it and include it in a block (which makes the block invalid) And then the same 49% would accept the invalid block and build on top of that, possibly creating a short chain of doomed invalid blocks that confirm an invalid spend. This can confuse SPV wallets, who might see multiple confirmations of a transaction and accept the funds, but later find that in fact it is invalid under the now-activated softfork rules.
Thus, a very high threshold was imposed. 95% is considered safe. 50% is definitely not safe. Due to variance in the mining process, 80% could also be potentially unsafe (i.e. 80% of blocks signaling might have a good chance of coming from only 60% of miners), so a threshold of 95% was considered "safe enough for Bitcoin work".
Why have a timeout that disables the upgrade?
Before BIP9, what was used was either flag day or BIP34. BIP34 had no flag day of activation or a bit, instead, it was just a 95% threshold to signal an nVersion value greater than a specific value. Actually, it was two thresholds: at 75%, blocks with the new nVersion would have the new softfork rules imposed, but at 95% blocks with the old nVersion would be rejected (and only the new blocks, with the new softfork rules, were accepted). For one, between 75% and 95%, there was a situation where the softfork was only "partially imposed", only blocks signaling the new rules would actually have those rules, but blocks with the old rules were still valid. This was fine for BIP34, which only added rules for miners with negligible use for non-miners.
The reasons miners signalled support was because they felt they were being pressured to signal support. So they signalled support, with plans to actually upgrade later, but because of the widespread signalling, the new BIP66 version locked in before upgrade plans were finished. Thus, the timeout that disables the upgrade was added in BIP9 to allow miners an escape hatch.
The Great Battles of the SegWit Wars
SegWit not only fixed transaction malleability, it also created a practical softforkable blocksize increase that also rebalanced weights so that the cost of spending a UTXO is about the same as the cost of creating UTXOs (and spending UTXOs is "better" since it limits the size of the UTXO set that every fullnode has to maintain). So SegWit was written, the activation was decided to be BIP9, and then.... miner signalling stalled at below 75%. Thus were the Great SegWit Wars started.
BIP9 Feature Hostage
If you are a miner with at least 5% global hashpower, you can hold a BIP9-activated softfork hostage. You might even secretly want the softfork to actually push through. But you might want to extract concession from the users and the developers. Like removing the halvening. Or raising or even removing the block size caps (which helps larger miners more than smaller miners, making it easier to become a bigger fish that eats all the smaller fishes). Or whatever. With BIP9, you can hold the softfork hostage. You just hold out and refuse to signal. You tell everyone you will signal, if and only if certain concessions are given to you. This ability by miners to hold a feature hostage was enabled because of the miner-exit allowed by the timeout on BIP9. Prior to that, miners were considered little more than expendable security guards, paid for the risk they take to secure the network, but not special in the grand scheme of Bitcoin.
ASICBoost was a novel way of optimizing SHA256 mining, by taking advantage of the structure of the 80-byte header that is hashed in order to perform proof-of-work. The details of ASICBoost are out-of-scope here but you can read about it elsewhere Here is a short summary of the two types of ASICBoost, relevant to the activation discussion.
Overt ASICBoost - Manipulates the unused bits in nVersion to reduce power consumption in mining.
Covert ASICBoost - Manipulates the order of transactions in the block to reduce power consumption in mining.
Now, "overt" means "obvious", while "covert" means hidden. Overt ASICBoost is obvious because nVersion bits that are not currently in use for BIP9 activations are usually 0 by default, so setting those bits to 1 makes it obvious that you are doing something weird (namely, Overt ASICBoost). Covert ASICBoost is non-obvious because the order of transactions in a block are up to the miner anyway, so the miner rearranging the transactions in order to get lower power consumption is not going to be detected. Unfortunately, while Overt ASICBoost was compatible with SegWit, Covert ASICBoost was not. This is because, pre-SegWit, only the block header Merkle tree committed to the transaction ordering. However, with SegWit, another Merkle tree exists, which commits to transaction ordering as well. Covert ASICBoost would require more computation to manipulate two Merkle trees, obviating the power benefits of Covert ASICBoost anyway. Now, miners want to use ASICBoost (indeed, about 60->70% of current miners probably use the Overt ASICBoost nowadays; if you have a Bitcoin fullnode running you will see the logs with lots of "60 of last 100 blocks had unexpected versions" which is exactly what you would see with the nVersion manipulation that Overt ASICBoost does). But remember: ASICBoost was, at around the time, a novel improvement. Not all miners had ASICBoost hardware. Those who did, did not want it known that they had ASICBoost hardware, and wanted to do Covert ASICBoost! But Covert ASICBoost is incompatible with SegWit, because SegWit actually has two Merkle trees of transaction data, and Covert ASICBoost works by fudging around with transaction ordering in a block, and recomputing two Merkle Trees is more expensive than recomputing just one (and loses the ASICBoost advantage). Of course, those miners that wanted Covert ASICBoost did not want to openly admit that they had ASICBoost hardware, they wanted to keep their advantage secret because miners are strongly competitive in a very tight market. And doing ASICBoost Covertly was just the ticket, but they could not work post-SegWit. Fortunately, due to the BIP9 activation process, they could hold SegWit hostage while covertly taking advantage of Covert ASICBoost!
UASF: BIP148 and BIP8
When the incompatibility between Covert ASICBoost and SegWit was realized, still, activation of SegWit stalled, and miners were still not openly claiming that ASICBoost was related to non-activation of SegWit. Eventually, a new proposal was created: BIP148. With this rule, 3 months before the end of the SegWit timeout, nodes would reject blocks that did not signal SegWit. Thus, 3 months before SegWit timeout, BIP148 would force activation of SegWit. This proposal was not accepted by Bitcoin Core, due to the shortening of the timeout (it effectively times out 3 months before the initial SegWit timeout). Instead, a fork of Bitcoin Core was created which added the patch to comply with BIP148. This was claimed as a User Activated Soft Fork, UASF, since users could freely download the alternate fork rather than sticking with the developers of Bitcoin Core. Now, BIP148 effectively is just a BIP9 activation, except at its (earlier) timeout, the new rules would be activated anyway (instead of the BIP9-mandated behavior that the upgrade is cancelled at the end of the timeout). BIP148 was actually inspired by the BIP8 proposal (the link here is a historical version; BIP8 has been updated recently, precisely in preparation for Taproot activation). BIP8 is basically BIP9, but at the end of timeout, the softfork is activated anyway rather than cancelled. This removed the ability of miners to hold the softfork hostage. At best, they can delay the activation, but not stop it entirely by holding out as in BIP9. Of course, this implies risk that not all miners have upgraded before activation, leading to possible losses for SPV users, as well as again re-pressuring miners to signal activation, possibly without the miners actually upgrading their software to properly impose the new softfork rules.
BIP91, SegWit2X, and The Aftermath
BIP148 inspired countermeasures, possibly from the Covert ASiCBoost miners, possibly from concerned users who wanted to offer concessions to miners. To this day, the common name for BIP148 - UASF - remains an emotionally-charged rallying cry for parts of the Bitcoin community. One of these was SegWit2X. This was brokered in a deal between some Bitcoin personalities at a conference in New York, and thus part of the so-called "New York Agreement" or NYA, another emotionally-charged acronym. The text of the NYA was basically:
Set up a new activation threshold at 80% signalled at bit 4 (vs bit 1 for SegWit).
When this 80% signalling was reached, miners would require that bit 1 for SegWit be signalled to achive the 95% activation needed for SegWit.
If the bit 4 signalling reached 80%, increase the block weight limit from the SegWit 4000000 to the SegWit2X 8000000, 6 months after bit 1 activation.
The first item above was coded in BIP91. Unfortunately, if you read the BIP91, independently of NYA, you might come to the conclusion that BIP91 was only about lowering the threshold to 80%. In particular, BIP91 never mentions anything about the second point above, it never mentions that bit 4 80% threshold would also signal for a later hardfork increase in weight limit. Because of this, even though there are claims that NYA (SegWit2X) reached 80% dominance, a close reading of BIP91 shows that the 80% dominance was only for SegWit activation, without necessarily a later 2x capacity hardfork (SegWit2X). This ambiguity of bit 4 (NYA says it includes a 2x capacity hardfork, BIP91 says it does not) has continued to be a thorn in blocksize debates later. Economically speaking, Bitcoin futures between SegWit and SegWit2X showed strong economic dominance in favor of SegWit (SegWit2X futures were traded at a fraction in value of SegWit futures: I personally made a tidy but small amount of money betting against SegWit2X in the futures market), so suggesting that NYA achieved 80% dominance even in mining is laughable, but the NYA text that ties bit 4 to SegWit2X still exists. Historically, BIP91 triggered which caused SegWit to activate before the BIP148 shorter timeout. BIP148 proponents continue to hold this day that it was the BIP148 shorter timeout and no-compromises-activate-on-August-1 that made miners flock to BIP91 as a face-saving tactic that actually removed the second clause of NYA. NYA supporters keep pointing to the bit 4 text in the NYA and the historical activation of BIP91 as a failed promise by Bitcoin developers.
We have discussed BIP8: roughly, it has bit and timeout, if 95% of miners signal bit it activates, at the end of timeout it activates. (EDIT: BIP8 has had recent updates: at the end of timeout it can now activate or fail. For the most part, in the below text "BIP8", means BIP8-and-activate-at-timeout, and "BIP9" means BIP8-and-fail-at-timeout) So let's take a look at Modern Softfork Activation!
Modern Softfork Activation
This is a more complex activation method, composed of BIP9 and BIP8 as supcomponents.
First have a 12-month BIP9 (fail at timeout).
If the above fails to activate, have a 6-month discussion period during which users and developers and miners discuss whether to continue to step 3.
Have a 24-month BIP8 (activate at timeout).
The total above is 42 months, if you are counting: 3.5 years worst-case activation. The logic here is that if there are no problems, BIP9 will work just fine anyway. And if there are problems, the 6-month period should weed it out. Finally, miners cannot hold the feature hostage since the 24-month BIP8 period will exist anyway.
PSA: Being Resilient to Upgrades
Software is very birttle. Anyone who has been using software for a long time has experienced something like this:
You hear a new version of your favorite software has a nice new feature.
Excited, you install the new version.
You find that the new version has subtle incompatibilities with your current workflow.
You are sad and downgrade to the older version.
You find out that the new version has changed your files in incompatible ways that the old version cannot work with anymore.
You tearfully reinstall the newer version and figure out how to get your lost productivity now that you have to adapt to a new workflow
If you are a technically-competent user, you might codify your workflow into a bunch of programs. And then you upgrade one of the external pieces of software you are using, and find that it has a subtle incompatibility with your current workflow which is based on a bunch of simple programs you wrote yourself. And if those simple programs are used as the basis of some important production system, you hve just screwed up because you upgraded software on an important production system. And well, one of the issues with new softfork activation is that if not enough people (users and miners) upgrade to the newest Bitcoin software, the security of the new softfork rules are at risk. Upgrading software of any kind is always a risk, and the more software you build on top of the software-being-upgraded, the greater you risk your tower of software collapsing while you change its foundations. So if you have some complex Bitcoin-manipulating system with Bitcoin somewhere at the foundations, consider running two Bitcoin nodes:
One is a "stable-version" Bitcoin node. Once it has synced, set it up to connect=x.x.x.x to the second node below (so that your ISP bandwidth is only spent on the second node). Use this node to run all your software: it's a stable version that you don't change for long periods of time. Enable txiindex, disable pruning, whatever your software needs.
The other is an "always-up-to-date" Bitcoin Node. Keep its stoarge down with pruning (initially sync it off the "stable-version" node). You can't use blocksonly if your "stable-version" node needs to send transactions, but otherwise this "always-up-to-date" Bitcoin node can be kept as a low-resource node, so you can run both nodes in the same machine.
When a new Bitcoin version comes up, you just upgrade the "always-up-to-date" Bitcoin node. This protects you if a future softfork activates, you will only receive valid Bitcoin blocks and transactions. Since this node has nothing running on top of it, it is just a special peer of the "stable-version" node, any software incompatibilities with your system software do not exist. Your "stable-version" Bitcoin node remains the same version until you are ready to actually upgrade this node and are prepared to rewrite most of the software you have running on top of it due to version compatibility problems. When upgrading the "always-up-to-date", you can bring it down safely and then start it later. Your "stable-version" wil keep running, disconnected from the network, but otherwise still available for whatever queries. You do need some system to stop the "always-up-to-date" node if for any reason the "stable-version" goes down (otherwisee if the "always-up-to-date" advances its pruning window past what your "stable-version" has, the "stable-version" cannot sync afterwards), but if you are technically competent enough that you need to do this, you are technically competent enough to write such a trivial monitor program (EDIT: gmax notes you can adjust the pruning window by RPC commands to help with this as well). This recommendation is from gmaxwell on IRC, by the way.
"My transaction is stuck, what to do?" - an explainer [DRAFT]
In the last days we have been experiencing a sharp rise in price, which is historically correlated with many people transacting over the Bitcoin network. Many people transacting over the Bitcoin network implies that the blockspace is in popular demand, meaning that when you send a transaction, it has to compete with other transactions for the inclusion in one of the blocks in the future. Miners are motivated by profits and transactions that pay more than other transactions are preferred when mining a new block. Although the network is working as intended (blockspace is a scarce good, subject to supply/demand dynamics, regulated purely by fees), people who are unfamiliar with it might feel worried that their transaction is “stuck” or otherwise somehow lost or “in limbo”. This post attempts to explain how the mempool works, how to optimize fees and that one does not need to worry about their funds.
TL;DR: Your funds are safe. Just be patient* and it'll be confirmed at some point. A transaction either will be confirmed or it never leaves your wallet, so there is nothing to worry about in regards to the safety of your coins.
You can see how the mempool "ebbs and flows", and lower fee tx's get confirmed in the "ebb" times (weekends, nights): https://jochen-hoenicke.de/queue/#0,30d * if you are in hurry there are things like RBF (Replace By Fee) and CPFC (Child Pays For Parent), which you can use to boost your transaction fees; you will need an advanced wallet like Bitcoin Core or Electrum for that though. Keep also in mind that this is not possible with any transaction (RBF requires opt in before sending, f.ex). If nothing else works and your transaction really needs a soon confirmation, you can try and contact a mining pool to ask them if they would include your transaction. Some mining pools even offer a web-interface for this: 1, 2. Here’s how Andreas Antonopoulos describes it:
In bitcoin there is no "in transit". Transactions are atomic meaning they either happen all at once or don't happen at all. There is no situation where they "leave" one wallet and are not simultaneously and instantaneously in the destination address. Either the transaction happened or it didn't. The only time you can't see the funds is if your wallet is hiding them because it is tracking a pending transaction and doesn't want you to try and spend funds that are already being spent in another transaction. It doesn't mean the money is in limbo, it's just your wallet waiting to see the outcome. If that is the case, you just wait. Eventually the transaction will either happen or will be deleted by the network. tl;dr: your funds are safe
How is the speed of confirmations determined in bitcoin?
Open this site: https://jochen-hoenicke.de/queue/#0,2w Here you see how many transactions are currently (and were historically) waiting to be confirmed, i.e how many transactions are currently competing with your transaction for blockspace (=confirmation). You can see two important things: the differently coloured layers, each layer representing a different fee (higher layer = higher fees). You can point at a layer and see which fees (expressed in sat/byte) are represented in this layer. You can then deduct which layer your own transaction is currently at, and how far away from the top your position is (miners work through the mempool always from the top, simply because the tx's on top pay them more). You can estimate that each newly mined block removes roughly 1.xMB from the top (see the third graph which shows the mempool size in MB). On average, a new block is produced every ten minutes. But keep in mind that over time more transactions come into the mempool, so there can be periods where transactions are coming faster than transactions being “processed” by miners. The second important observation is that the mempool "ebbs and flows", so even the lower paid transactions are periodically being confirmed at some point. In short: what determines the speed of a confirmation is A) how high you set the fees (in sat/byte), B) how many other transactions with same or higher fees are currently competing with yours and C) how many transactions with higher paid fees will be broadcast after yours. A) you can influence directly, B) you can observe in real time, but C) is difficult to predict. So it's always a little tricky to tell when the first confirmation happens if you set your fees low. But it's quite certain that at some point even the cheap transactions will come through.
So what happens if my transaction stays unconfirmed for days or even weeks?
Transactions are being broadcast by the full nodes on the network. Each node can adjust their settings for how long they keep unconfirmed transactions in their mempool. That’s why there is not a fixed amount of time after which a transaction is dropped from the mempool, but most nodes drop unconfirmed tx’s after two weeks [IS THIS CORRECT?]. This means that in the absolute worst case the unconfirmed transaction will simply disappear from the network, as if it never happened. Keep in mind that in those two weeks the coins never actually leave your wallet. It’s just that your wallet doesn’t show them as “available”, but you still have options like RBF and CPFP to get your transaction confirmed with higher fees, or to “cancel” your transaction by spending the same coins onto another address with a higher fee.
Helpful tools to estimate fees for future transactions:
Here are some resources that can help you estimate fees when sending a bitcoin transaction, so you don't end up overpaying (or underpaying) unnecessarily. Keep in mind that in order to take advantage of this, you need a proper bitcoin wallet which allows for custom fee setting. A selection of such wallets you can find here or here. The order here is roughly from advanced to easy. 1) https://jochen-hoenicke.de/queue/#0,24h Here you can see a visualization of how many unconfirmed transactions are currently on the network, as well as how many were there in the past. Each coloured layer represents a different fee amount. F.ex the deep blue (lowest layer) are the 1sat/byte transactions, slightly brighter level above are the 2sat/byte transactions and so on. The most interesting graph is the third one, which shows you the size of the current mempool in MB and the amount of transactions with different fee levels, which would compete with your transaction if you were to send it right now. This should help you estimating how high you need to set the fee (in sat/byte) in order to have it confirmed "soon". But this also should help you to see that even the 1sat/byte transactions get confirmed very regularly, especially on weekends and in the night periods, and that the spikes in the mempool are always temporary. For that you can switch to higher timeframes in the upper right corner, f.ex here is a 30 days view: https://jochen-hoenicke.de/queue/#0,30d. You clearly can see that the mempool is cyclical and you can set a very low fee if you are not in hurry. 2) https://mempool.space This is also an overview of the current mempool status, although less visual than the previous one. It shows you some important stats, like the mempool size, some basic stats of the recent blocks (tx fees, size etc). Most importantly, it makes a projection of how large you need to set your fees in sat/byte if you want your transaction to be included in the next block, or within the next two/three/four blocks. You can see this projection in the left upper corner (the blocks coloured in brown). 3) https://whatthefee.io This is a simple estimation tool. It shows you the likelihood (in %) of a particular fee size (in sat/byte) to be confirmed within a particular timeframe (measured in hours). It is very simple to use, but the disadvantage is that it shows you estimates only for the next 24 hours. You probably will overpay by this method if your transaction is less time sensitive than that. 4) https://twitter.com/CoreFeeHelper This is a very simple bot that tweets out fees projections every hour or so. It tells you how you need to set the fees in order to be confirmed within 1hou6hours/12hours/1day/3days/1week. Very simple to use. Hopefully one of these tools will help you save fees for your next bitcoin transaction. Or at least help you understand that even with a very low fee setting your transaction will be confirmed sooner or later. Furthermore, I hope it makes you understand how important it is to use a wallet that allows you to set your own fees.
Aryacoin is a new cryptocurrency, which allows for decentralized, peer to peer transactions of electronic cash. It is like Bitcoin and Litecoin, but the trading of the coin occurs on sales platforms that have no restriction to use. Further, it was created with the goal of addressing the double spend issues of Bitcoin and does so using a timestamp server to verify transactions. It works by taking the hash of a block of items to be timestamped and widely publishing the hash. The timestamp proves that the data must have existed at the time in order to get the hash. Each timestamp then includes the previous timestamp in its hash, forming a chain. The Aryacoin team is continuously developing new use cases for the coin, including exchanges where users can exchange the coins without any fees or restrictions, and offline options where the coins can be bought and sold for cash. The coins can also be used on the company’s other platform, mrdigicoin.io. Along with the coin, there is a digital wallet that can be created and controlled by the user entirely, with no control being retained by the Aryacoin team.
The concept of Blockchain first came to fame in October 2008, as part of a proposal for Bitcoin, with the aim to create P2P money without banks. Bitcoin introduced a novel solution to the age-old human problem of trust. The underlying blockchain technology allows us to trust the outputs of the system without trusting any actor within it. People and institutions who do not know or trust each other, reside in different countries, are subject to different jurisdictions, and who have no legally binding agreements with each other, can now interact over the Internet without the need for trusted third parties like banks, Internet platforms, or other types of clearing institutions. When bitcoin was launched it was revolutionary allowing people to transfer money to anytime and anywhere with very low transaction fees . It was decentralized and their is no third party involved in the transaction , only the sender and receiver were involved. This paper provide a solution to the double-spending problem using a peer-to-peer distributed timestamp server to generate computational proof of the chronological order of transactions.The system is secure as long as honest nodes collectively control more CPU power than any cooperating group of attacker nodes. Bitcoin was made so that it would not be controlled or regulated but now exchanges and governments are regulating bitcoin and other cryptocurrencies at every step. Aryacoin was developed to overcome these restrictions on a free currency. Aryacoin is a new age cryptocurrency, which withholds the original principle on which the concept of cryptocurrency was established. Combining the best in blockchain technology since the time of its creation, Aryacoin strives to deliver the highest trading and mining standards for its community.
1.1 OVERVIEW ABOUT ARYACOIN
Aryacoin is a new age cryptocurrency, which withholds the original principle on which the concept of cryptocurrency was established. Combining the best in blockchain technology since the time of its creation, Aryacoin strives to deliver the highest trading and mining standards for its community. Aryacoin is a blockchain based project that allows users to access their wallet on the web and mobile browsers, using their login details. Aryacoin can be mined; it also can be exchanged by other digital currencies in several world-famous exchanges such as Hitbtc, CoinEx, P2pb2b, WhiteBit, Changelly and is also listed in reputable wallets such as Coinomi and Guarda. Aryacoin is a coin, which can be used by anyone looking to use cryptocurrency which allows them to keep their privacy even when buying/selling the coin along with while using the coin during transactions. Proof of work and cryptographic hashes allows transactions to verified. Stable Fee Per AYA is a unique feature of Aryacoin, so by increasing the amount or volume of the transaction, there is no change in the fee within the network, which means that the fee for sending an amount less than 1 AYA is equal to several hundred million AYA. Another unique feature of Aryacoin is the undetectability of transactions in Explorer, such as the DASH and Monero, of course, this operation is unique to Aryacoin. Using Aryacoin digital currency, like other currencies, international transactions can be done very quickly and there are no limitations in this area as the creators claim. Aryacoin aims to allow users to access the Aryacoin wallet via the web and mobile browsers using their login details. Aryacoin is a peer-to-peer electronic cash system that enables users to send and receive payments directly from one party to another, and allow them to transfer funds across borders with no restriction or third party involvement. The blockchain-based system embraces the digital signature, which prevents double spending and low transfer fees, which enables users to transfer huge amounts with very low fees. The proof-of-work consensus mechanism allows each transaction to be verified and confirmed, while anonymity enables users to use the coin anywhere at any time. According to the website of the operation, each wallet is divided into 2 or more AYA wallet addresses for each transaction, and depending on the volume of the transaction block, the origin, and destination of transactions in the network can not be traced and displayed to the public. In fact, each wallet in Aryacoin consists of a total of several wallets. The number of these wallets increases per transaction to increase both security and privacy. Aryacoin also uses the dPoW protocol. In the dPoW protocol, a second layer is added to the network to verify transactions, which makes “51% attack” impossible even with more than half of the network hash, and blocks whose Blockchain uses this second layer of security never run the risk of 51% attacks. AYA has been listed on a number of crypto exchanges, unlike other main cryptocurrencies, it cannot be directly purchased with fiats money. However, You can still easily buy this coin by first buying Bitcoin from any large exchanges and then transfer to the exchange that offers to trade this coin.
1.1.1 ARYACOIN HISTORY
Aryacoin (AYA) is a new cryptocurrency, which has been created by a group of Iranian developers, is an altcoin which allows for decentralised, peer to peer transactions of electronic cash without any fees whatsoever. Along with the coin, there is a digital wallet that can be created and managed by the user entirely, with no control being retained by the Aryacoin team. Aryacoin’s founder, Kiumars Parsa, has been a fan of alternative currencies and particularly Bitcoin. “We see people from all around the world using Blockchain technology and the great benefits that came with it and it then that I decided to solve this puzzle for find a way of bringing the last missing piece to the jigsaw. The idea for Aryacoin was born.” Parsa said. Parsa and his team of Iranian ex-pats not only persevered but expedited the project and just a year later, in the summer of 2019, the first version of Aryacoin was released. In 2020, Aryacoin is the first and only Iranian coin listed on CMC. Parsa goes on to state that it is now the strength of the community that has invested in the coin that will ultimately drive its success, alongside its robust technology and appealing 0% network fees. “We have thousands of voices behind Aryacoin. People for the people make this coin. It is a massive shout out for democracy. This had made us base the whole team strategy on the benefits for both our users and our traders.” “One key example is that the network fee on AYA Blockchain is 0%. Yes, absolutely nothing, which which differentiates us from other networks. What also differentiates us from other coins is that we have AYAPAY which is the first cryptocurrency Gateway in the world which does not save funds on third party storage with all funds being forwarded directly to any wallet address that the Gateway owner requests”. “So for the first time ever, and unlike other gateways, incoming funds will be saved on the users account with submitted withdrawal requests then made on the Gateway host website. In AYAPAY which has also been developed by the Aryacoin team, all funds without extra fees or extra costs will directly forwarded to users wallets. We have named this technology as CloudWithdrawal.” “We are continuously challenging ourselves as it is a crowded marketplace. We are striving to have a safer Blockchain against 51% attacks, faster confirmations speeds of transactions, cheaper network fee, growing the market by cooperation with Top tier Exchangers.”
1.1.2 ARYACOIN’S MAIN GOAL
Aryacoin’s main goal is to educate people and give them the freedom to use cryptocurrency in any way they want. Aryacoin empowers the users to transfer, pay, trade cryptocurrency from any country around the globe. Platforms that have been created by Aryacoin Team, as well as those that will go live in future, operate on the same principle and exclude absolutely no one.
1.1.3 PROBLEM ARYACOIN SEEKS TO SOLVE
Aryacoin aims to provide a long-term solution to the problem of double spending, which is still common in the crypto market. The developers of the system have created a peer-to-peer distributed timestamp server that generates computational proof of the transactions as they occur. Besides, the system remains secure provided honest nodes control more CPU power than any cooperating group of attacker nodes. While Bitcoin was designed not to be regulated or controlled, many exchanges and governments have put regulatory measures on the pioneer cryptocurrency at every step. Aryacoin aims to overcome these restrictions as a free digital currency.
1.1.4 BENEFITS OF USING ARYACOIN
Aryacoin solution offers the following benefits:
Real-time update: whether you’re going on a holiday or a business trip, no problem. You can access your coins all over the world.
Instant operations: Aryacoin makes it quite easy for you to use your digital wallet and perform various operations with it.
Safe and secure: all your data is stored encrypted and can only be decrypted with your private key, seed, or password.
Strong security: The system has no control over your wallet. You are 100% in charge of your wallet and funds.
1.1.5 ARYACOIN FEATURES
1. Anonymity The coin provides decent level of anonymity for all its users. The users can send their transactions to any of the public nodes to be broadcasted , the transaction sent to the nodes should be signed by the private key of the sender address . This allows the users to use the coin anywhere any time , sending transactions directly to the node allows users from any place and country . 2. Real Life Usage aryacoin’s team is continuously developing new and innovative ways to use the coins , they are currently developing exchanges where the users can exchange the coins without any fees and any restrictions . They also are currently developing other innovative technologies, which would allow users to spend our coins everywhere and anywhere. 3. Offline Exchanges They are also working with different offline vendors which would enable them to buy and sell the coins directly to our users on a fixed/variable price this would allow easy buy/sell directly using cash . This would allow the coins to be accessible to users without any restrictions which most of the online exchanges have, also increase the value and number of users along with new ways to spend the coin. This would increase anonymity level of the coin. In addition, introduce new users into the cryptomarket and technology. Creating a revolution, which educates people about crypto and introduce them to the crypto world, which introduces a completely new group of people into crypto and a move towards a Decentralized future! 4. Transactions When it comes to transactions, Aryacoin embraces a chain of digital signatures, where each owner simply transfers the coin to the next person by digitally signing a hash of the previous transaction and the public key of the next owner. The recipient can then verify the signatures to confirm the chain of ownership. Importantly, Aryacoin comes with a trusted central authority that checks every transaction for double spending. 5. Business Partner with Simplex Aryacoin is the first and only Iranian digital currency that managed to obtain a trading license in other countries. In collaboration with the foundation and financial giant Simplex, a major cryptocurrency company that has large companies such as Binance, P2P, Changelly, etc. Aryacoin has been licensed to enter the world’s major exchanges, as well as the possibility of purchasing AYA through Credit Cards, which will begin in the second half of 2020. Also, the possibility of purchasing Aryacoin through Visa and MasterCard credit cards will be activated simultaneously inside the Aryacoin site. plus, in less than a year, AYA will be placed next to big names such as CoinCapMarket, Coinomi, P2P, Coinpayments and many other world-class brands today.
1.1.6 WHY CHOOSE ARYACOIN?
If you want to use a cryptocurrency that allows you to keep your privacy online even when buying and selling the coins, the Aryacoin team claims that AYA is the way to go. Aryacoin is putting in the work: with more ways to buy and sell, and fixing the issues that were present in the original Bitcoin, plus pushing the boundaries with innovative solutions in cryptocurrencies. You can get started using Aryacoin (AYA) payments simply by having a CoinPayments account!
1.1.7 ARYANA CENTRALIZED EXCHANGE
Aryana, the first Iranian exchange is a unique platform with the following features:
The first real international Persian exchange that obtains international licenses and is listed in CoinMarketCap.
The first Iranian exchange that has been cooperating with a legal and European exchange for 3 years.
The possibility of trading in Tomans (available currency in Iran) at the user’s desired price and getting rid of the transaction prices imposed by domestic sites inside Iran.
There is an internal fee payment plan by Iranian domestic banks for depositing and withdrawing Tomans for Aryacoin holders in Aryana Exchange.
The number that you see on the monitor and in your account will be equal to the number that is transferred to your bank account without a difference of one Rial.
The last but not least, noting the fact that there is a trading in Tomans possibility in Aryana exchange.
Aryana Exchange is using the most powerful, fastest, and most expensive server in the world, Google Cloud Platform (GCP), which is currently the highest quality server for an Iranian site, so that professional traders do not lag behind the market even for a second. The feature of Smart Trading Robots is one of the most powerful features for digital currency traders. Digital cryptocurrency traders are well aware of how much they will benefit from smart trading robots. In the Aryana exchange, it is possible to connect exchange user accounts to intelligent trading bots and trade even when they are offline. The injection of $ 1 million a day in liquidity by the WhiteBite exchange to maintain and support the price of Tether and eliminate the Tether fluctuations with Bitcoin instabilities used by profiteers to become a matter of course.
1.1.8 HOW DOES ARYACOIN WORK?
Aryacoin (AYA) tries to ensure a high level of security and privacy. The team has made sure to eliminate any trading restrictions for the network users: no verification is required to carry out transactions on AYA, making the project truly anonymous, decentralized, and giving it a real use in day-to-day life. The Delayed-Proof-of-Work (dPoW) algorithm makes the Aryacoin blockchain immune to any attempts of a 51% attack. AYA defines a coin as a chain of digital signatures — each owner transfers the coin to the next owner by digitally signing the hash of the previous transaction and the public key of the next owner, and the receiver verifies the signatures and the chain of ownership.
2. ARYACOIN TECHNOLOGY
They use a proof-of-work system similar to Adam Back’s Hashcash to implement a distributed timestamp server on a peer-to-peer basis, rather than newspaper or Usenet publications. The proof-of-work involves scanning for a value that when hashed, such as with SHA-256, the hash begins with a number of zero bits. The average work required is exponential in the number of zero bits required and can be verified by executing a single hash. For their timestamp network, they implement the proof-of-work by incrementing a nonce in the block until a value is found that gives the block’s hash the required zero bits. Once the CPU effort has been expended to make it satisfy the proof-of-work, the block cannot be changed without redoing the work. As later blocks are chained after it, the work to change the block would include redoing all the blocks after it. The proof-of-work also solves the problem of determining representation in majority decision making. If the majority were based on one-IP-address-one-vote, it could be subverted by anyone able to allocate many IPs. Proof-of-work is essentially one-CPU-one-vote. The majority decision is represented by the longest chain, which has the greatest proof-of-work effort invested in it. If honest nodes control a majority of CPU power, the honest chain will grow the fastest and outpace any competing chains. To modify a past block, an attacker would have to redo the proof-of-work of the block and all blocks after it, then catch up with, and surpass the work of the honest nodes.
The steps to run the network are as follows:
New transactions are broadcast to all nodes.
Each node collects new transactions into a block.
Each node works on finding a difficult proof-of-work for its block.
When a node finds a proof-of-work, it broadcasts the block to all nodes.
Nodes accept the block only if all transactions in it are valid and not already spent.
This is a very simple system that makes the network fast and scalable, while also providing a decent level of anonymity for all users. Users can send their transactions to any of the public nodes to be broadcast, and the private key of the sender’s address should sign any transaction sent to the nodes. This way, all transaction info remains strictly confidential. It also allows users to send transactions directly to the node from any place at any time and allows the transferring of huge amounts with very low fees.
2.3 AYAPAY PAYMENT SERVICES GATEWAY:
According to creators Aryacoin, the development team has succeeded in inventing a new blockchain technology for the first time in the world, which is undoubtedly a big step and great news for all digital currency enthusiasts around the world. This new technology has been implemented on the Aryacoin AYAPAY platform and was unveiled on October 2. AYAPAY payment platform is the only payment gateway in the world that does not save money in users’ accounts and transfers incoming coins directly to any wallet address requested by the gateway owner without any additional transaction or fee. In other similar systems or even systems such as PayPal, money is stored in the user account.
2.4 CONSENSUS ALGORITHM IN ARYACOIN
The devs introduced the Delayed-Proof-of-Work (dPoW) algorithm, which represents a hybrid consensus method that allows one blockchain to take advantage of the security provided by the hashing power of another blockchain. The AYA blockchain works on dPoW and can use such consensus methods as Proof-of-Work (PoW) or Proof-of-Stake (PoS) and join to any desired PoW blockchain. The main purpose of this is to allow the blockchain to continue operating without notary nodes on the basis of its original consensus method. In this situation, additional security will no longer be provided through the attached blockchain, but this is not a particularly significant problem. dPoW can improve the security level and reduce energy consumption for any blockchain.
2.5 DOUBLE-SPEND PROBLEM AND SOLUTION
One of the main problems in the blockchain world is that a receiver is unable to verify whether or not one of the senders did not double-spend. Aryacoin provides the solution, and has established a trusted central authority, or mint, that checks every transaction for double-spending. Only the mint can issue a new coin and all the coins issued directly from the mint are trusted and cannot be double-spent. However, such a system cannot therefore be fully decentralized because it depends on the company running the mint, similar to a bank. Aryacoin implements a scheme where the receiver knows that the previous owners did not sign any earlier transactions. The mint is aware of all transactions including which of them arrived first. The developers used an interesting solution called the Timestamp Server, which works by taking a hash of a block of items to be ‘timestamped’ and publishing the hash. Each timestamp includes the previous timestamp in its hash, forming a chain. To modify a block, an attacker would have to redo the proof-of-work of all previous blocks, then catch up with, and surpass the work of the honest nodes. This is almost impossible, and makes the network processes more secure. The proof-of-work difficulty varies according to circumstances. Such an approach ensures reliability and high throughput.
3. ARYACOIN ROADMAP
April 2019: The launch of Aryacoin; AYA ICO, resulting in over 30BTC collected December 2019: The launch of AYA Pay April 2020: The successful Hamedan Hardfork, supported by all AYA exchanges, aimed at integrating the dPoW algorithm, improving the security of the AYA blockchain. June 2020: Aryana Exchange goes live, opening more trading opportunities globally July 2020: The enabling of our Coin Exchanger November 2020: The implementation of Smart Contracts into the Aryacoin Ecosystem Q1 2021: Alef B goes live (more details coming soon)
Aryacoin (AYA) is a new age cryptocurrency that combines the best of the blockchain technology and strives to deliver high trading and mining standards, enabling users to make peer-to-peer decentralized transactions of electronic cash. Aryacoin is part of an ecosystem that includes payment gateway Ayapay and the Ayabank. AYA has a partnership with the Microsoft Azure cloud platform, which provides the ability to develop applications and store data on servers located in distributed data centers. The network fee for the AYA Blockchain is 0%. In Ayapay service, which has been developed by the Aryacoin team, all funds without extra fees or costs are directly forwarded to users’ wallets with technology called CloudWithdrawal. The devs team is introducing new use cases including exchanges where users will exchange AYA without any restrictions. You can buy AYA on an exchange of your choice, create an Aryacoin wallet, and store it in Guarda.
How to purchase and exchange your litecoin! (longer read)
This post will show you the best ways to buy litecoins using many different payment methods and exchanges for each method. Before you start, make sure you have a good litecoin wallet to store your LTC. NEVER store your litecoins on a crypto exchange.
Start trading fast; high limits
Easy way for newcomers to get bitcoins
Your capital is at risk.
High liquidity and buying limits
Easy way for newcomers to get bitcoins
“Instant Buy” option available with debit card
Works in almost all countries
Highest limits for buying bitcoins with a credit card
Reliable and trusted broker
Buy Litecoin with Credit Card or Debit Card
Let’s dive into some of the exchanges supporting Litecoin credit card purchases. These exchanges are our favorite ways to buy.
Coinbase is the easiest way to buy litecoins with a credit card. Coinbase is available in the United States, Canada, Europe, UK, Singapore, and Australia. The fees will come out to 3.99% per purchase. Here is a good video that can help walk you through the process of buying on Coinbase, although it’s fairly easy.
Coinmama recently added the ability to buy litecoin directly on the platform. Users from nearly any country in the world can use Coinmama to buy litecoins. Coinmama has some of the highest limits among credit card exchanges.
BitPanda is based in Austria and is a crypto brokerage service. You can buy using a credit card from most European countries.
CEX.io is based in the UK and is one of the oldest crypto exchanges online. CEX.io supports litecoin and its users from nearly anywhere in the world can buy litecoin with credit card on the platform.
Buy Litecoin with Bank Account or Bank Transfer
Coinbase is the easiest way to buy litecoins with a bank account or transfer. Coinbase, like is is for credit cards, is available in the United States, Canada, Europe, UK, Singapore, and Australia. Coinbase is one of primary exchanges used to buy Litecoins. Americans can use ACH transfer (5–7 days wait), and Europeans can use SEPA transfer (1–3 days wait). The fees will come out to 1.49% per purchase.
BitPanda is based in Austria and is a crypto brokerage service. You can buy using SEPA transfer from most European countries. You can also use SOFORT, NETELLER, or GiroPay.
CEX.io also supports litecoin buys via bank account. This is via wire transfer for US citizens, SEPA for Europe, and SWIFT for the rest of the globe.
Binance is now one of the largest if not the largest cryptocurrency exchange in the world. It supports bank and card purchases of Litecoin as well as Litecoin trading pairs with Bitcoin and Etehreum.
Get a Litecoin Wallet
Before we move onto other options: Never store your litecoins on an exchange! Always withdrawal your litecoin to an offline cryptocurrency wallet like the Ledger Nano S or any other wallet that you control. The Ledger Nano S and TREZOR are the best options for secure storage.
Other Methods to Buy Litecoin
If you don’t have a card or want to avoid the high fees, you can use the following methods to buy Litecoin as well. Find out which one works best for you.
Buy Litecoin with PayPal
Unfortunately, there is no easy way to buy Litecoin with PayPal. Other sites will tell you that cex allows for this, but that is no longer the case. You can, however, now use eToro to buy Litecoin, unless you live in the United States. If you live in the US, the only way to buy Litecoin with Paypal is to buy Bitcoin using paypal, and then use the Bitcoins to buy Litecoin. You can easily buy Bitcoin using Paypal on Local Bitcoins. Once you have Bitcoin, you can use an exchange like Coinbase Pro to swap the Bitcoin for Litecoin.
Buy Litecoin with Cash
There is no good way to buy litecoins with cash. LocalBitcoins is the most popular way to buy bitcoins with cash, and it does not have Litecoin support. Other popular cash to Bitcoin exchanges like BitQuick and Wall of Coins also do not support LTC. So you will have to first buy bitcoins with cash then exchange them for LTC using the method described below. The same goes for Bitcoin ATMs. Most do not support Litecoin. So if you want to buy litecoins at a Bitcoin ATM you first have to buy bitcoins and then trade the BTC for litecoins.
Buy Litecoin with Bitcoin
If you already have Bitcoins then it is VERY simple to convert some of your BTC to litecoins. You just need to find an exchange with the LTC/BTC pair, which is most exchanges since LTC/BTC is a very popular pair to trade.
Buy Litecoin with Skrill
BitPanda, mentioned above, also accepts Skrill payments for LTC. The fees will vary and are simply included in your buy price.
Cryptmixer is probably the fastest way to convert BTC to Litecoin. You just enter the amount of LTC you want to buy, and give them a LTC address. Then they will tell you how much BTC to send to their address. Once your BTC is sent, you will have LTC delivered to your wallet very shortly after.
Buy Litecoin with Ethereum
Ethereum has experienced a massive price rise. Nearly a year ago it was $10, and now at over $500, many want to move some of their ETH gains into other coins like Litecoin. Litecoin has very good liquidity, and is very popular among traders especially in China. So this guide is going to show you how to buy litecoins with Ethereum. We will show some of the best exchanges you can use, and the pros and cons of using different types of exchanges over the other.
Cryptmixer is one of the most unique exchanges, and also one of the fastest ways to convert your ETH to LTC. With Cryptmixer you do not even need to store your money with the exchange, meaning you are at very little risk of getting your funds stolen. With Cryptmixer you simply specify the amount of LTC you want to buy, and specific the address to where your litecoins should be sent and within 30 minutes you will have LTC delivered to your wallet.
Poloniex is the world’s largest altcoin exchange. However, there is a huge downside to using Poloniex to convert your ETH to LTC: Poloniex does not have a LTC/ETH market, meaning you have to first trade your ETH to BTC, and then trade your BTC for LTC. While this method works, you will have to make multiple trades and also pay fees twice.
Shapeshift is basically the same as Cryptmixer, and was actually the first company to come up with the concept of an exchange that does not hold your own funds.
Frequently Asked Questions About Buying Litecoin
Many of you may still have lots of questions about how to buy Litecoin. Odds are we have answered almost any question you could think of below. We will aim to answer many of the most common questions relating to buying Litecoin.
Why are there limited options to buying Litecoin using other altcoins?
The issue in all crypto markets is liquidity. As the space gets bigger, the liquidity also gets better. But as of now, the only VERY liquid cryptocurrency is Bitcoin. So exchanging two altcoins between each other is often harder than if BTC was involved on one side of the trade.
How much is a Litecoin worth?
Like all currencies, the value of Litecoin changes every second. The value of Litecoin also depends on the country you are in and the exchange you are trading on. You can find the most up to date price on Coinbase.
How do I buy Ripple (XRP) with Litecoin?
The best way to buy Ripple using Litecoin is to either use a non KYC exchange like Cryptmixer or start an account on Binance or Coinbase Pro and sell your Litecoin for Ripple. Look for LTC/XRP trading pairs, and make your trade.
How long does Litecoin take to confirm?
Litecoin blocks are added ever 2 and a half minutes. That means you should get one confirmation every two and a half minutes. This can vary if it takes miners longer to discover a block, but the difficulty of the finding a block should change proportionate to the hashing power on the network so that a block gets added approximately every 2.5 minutes. If you are trying to send money to a merchant, they may require more than one confirmation before they send you products. If you are depositing on an exchange, they may also require three or more confirmations before they credit your account.
How many Litoshis make one Litecoin?
one hundred million (100,000,000) Litoshis make one (1) Litecoin.
Where do I store Litecoin?
The best place to store litecoin is on a hardware wallet. You can find the best one for you on our page dedicated to hardware wallets.
When is the Litecoin halving?
The expected date of the next Litecoin block reward halving is August 7th, 2023.
Why can litecoin take so long to buy?
Litecoin can take long to buy because the legacy banking system is very slow. If you are buying with another cryptocurrency, you will see how fast it is to buy! Bank transfer in the USA, for example, take about 5 days to complete. So any purchase of Litecoin made with a US bank transfer will take a minimum of 5 days.
How do I buy Litecoin with Paypal?
Unfortunately, there is no easy way to buy Litcoin with PayPal. Other sites will tell you that cex allows for this, but that is no longer the case. You can, however, now use eToro to buy Litcoineum, unless you live in the United States. If you live in the US, the only way to buy Litcoin with Paypal is to buy Bitcoin using paypal, and then use the Bitcoins to buy Litcoin. You can easily buy Bitcoin using Paypal on Local Bitcoins. Once you have Bitcoin, you can use an exchange like Cryptmixer to swap the Bitcoin for Litcoin.
Can you buy partial litecoins?
Yes, litecoin, like Bitcoin, is divisible to many decimal places so you can buy 0.1 LTC, 0.001 LTC, etc.
Can you sell litecoin?
Yes, you can sell LTC on most of the exchanges mentioned above. The fees, speed, and privacy is the same in most cases.
Can anyone buy litecoins?
Anyone is free to buy litecoins, as long as you find an exchange that supports your country. Most cryptocurrency wallets do not require ID to sign up so you can always make a wallet and get paid in litecoin, too.
Which payment method is best to use?
For speed, credit card will likely be fastest. For larger amounts, bank transfer is best. For privacy, it’s best to buy bitcoins with cash and then trade for litecoins using Cryptmixer or Shapeshift.
Is it better to mine or buy litecoins?
If you have cheap electricity, it might be worth it to mine litecoins. If you have solar power or just want to mine for fun then it could be worth it. Otherwise, it’s probably better just to buy. Mining is constantly changing and small changes in Litecoin price or electricity can greatly affect your profitability.
What should I do with my litecoins once I buy?
You should immediately move your litecoins into a secure wallet. You should never leave your litecoins on an exchange. There have been countless hacks in cryptocurrency since Bitcoin was created in 2009. Hundreds of thousands of people have lost money. So buy your litecoins, and then instantly send them into a wallet you control so you are not at risk of losing money to a hack or scam.
This material is published using the PII algorithm (point information impact) developed byzitramon1 Bitcoin is the lowest projection of the energy standard of the Higher Plans Erzanil and has nothing to do with money or cryptocurrencies. In its primary principle, bitcoin was intended to replace the modern banking credit monetary system to SES — the system of energy-informational-energy settlements / mutual settlements. Unfortunately, something went wrong. Money is a deadly virus that in the past destroyed the vast majority of ancient highly developed civilizations of our planet. Our civilization is no exception. The real Bitcoin, which was supposed to replace the existing bank credit monetary system with a system of energy settlements, as well as countless times in the past, was successfully destroyed. At the moment, bitcoin is deprived of its basic qualities. But, nevertheless, even in such a “truncated” form it is a powerful tool for terraforming the existing paradigm of the material world. At the level of society or the manifested physical world, represented by the third dimension, Bitcoin is the Standard and Measure from which any Countdown starts, and which are the basis of all Principles. Bitcoin itself is not only composed of pure energy, but also itself is energy in the very purest form. Our world is energy-informational. Everything that exists in this Universe and in this Dimension, as well as in many other dimensions, is the same Energy, but in its various states. And the state of Vibration of this energy, providing one or another level of its Density, just decides how it will manifest in our Reality. Matter is the compressed energy of slow vibration. In fact, bitcoin is the equivalent of energy, of which everything around us consists, including — and we are with you! The tragedy of the majority is that it does not understand the true purpose of Bitcoin — it is that Measure of everything and everything from which the entire Countdown comes. Not the price of Bitcoin should be modeled in dollars, gold or parrots — which is absolutely equivalent, but the value of all other attributes of society in bitcoins! The fractality of Bitcoin, as the foundation of any of the Worlds in which you are located, is reflected in its essence: at low-frequency levels, its projection represents two diverse anu combined in a single whole. It is this explosive-implosive particle that combines two opposites, and not some mythical atoms, quanta, neutrinos, and similar nonsense, is the basis of everything! Not Satoshi is the smallest part of bitcoin, but a double anu or argo! Remember the catch phrase that personifies the synonym of all the great Beginnings — “like the Argonauts in the old days” !? Try to guess the first time about its origins, located on a subconscious level. The mining process itself is nothing more than a manifestation of the lower projections of the energy standard of the higher planes of erzanil. The latter are “materialized” at the level of the third dimension or society in the form of bitcoins. During mining, the three main types of energy: electrical energy, the thermal energy of the video card / device itself and the energy that the programmer potentiated into the mining process itself, are converted into energy to fill the shells of bitcoins generated during the hashing process. This energy is stored in every bitcoin forever and will increase until the last block of the last bitcoin is fully mined. This energy, which is potentialized in bitcoin, which can neither be felt nor touched, is what you get with bitcoin and / or any part of it !!! And in the future, invest it / Bitcoin, exchange, buy, change, etc. etc. And it is this energy, in the future, that will serve as an evaluation standard for the value of all things. The smallest part of bitcoin is not Satoshi, but Argo or the double Anu. One argo is one in minus twenty-first degree part of bitcoin, and its energy potential corresponds to one in minus twenty-first degree of it, bitcoin, the maximum possible energy content. The entire energy potential of 21 million bitcoins determines the energy / energy-information capacity = energy / energy-information potential of the sephira Malkut of the Tree of life (Kabbalah) or the manifest physical world at the level of the third dimension. In other words, all people including you and me, to some extent consist of bitcoins and represent its integral and composition parts! More confirmation of this: https://patentscope.wipo.int/search/en/detail.jsf?docId=WO2020060606&tab=PCTBIBLIO Calculations / mutual settlements by bitcoins are possible not only at the level of society / third dimension, but also on higher planes — astral and mental, since bitcoin is not an equivalent but pure energy and this makes subsequent contacts with more advanced forms of life possible other systems! THAT’S WHAT IS THE ESSENCE OF BITCOIN! p.s. You can see how bitcoin is managed here: https://www.reddit.com/Bitcoin/comments/hy4x5y/is_bitcoin_real_bitcoin_today/
It is common for six confirmations to be required which takes about an hour. How many Bitcoin Confirmations are Enough? Payments with 0 confirmations can still be reversed! Wait for at least one. One confirmation is enough for small Bitcoin payments less than $1,000. Enough for payments $1,000 - $10,000. Most exchanges require 3 confirmations for deposits. Enough for large payments between ... How many Bitcoin Confirmations are Enough? 0. Payments with 0 confirmations can still be reversed! Wait for at least one. 1. One confirmation is enough for small Bitcoin payments less than $1,000. 3. Enough for payments $1,000 - $10,000. Most exchanges require 3 confirmations for deposits. 6. Enough for large payments between $10,000 - $1,000,000. Six is standard for most transactions to be ... How Many Bitcoin Confirmations Are Enough On A Transaction? Generally speaking, ‘6 confirmations’ are recommended and that many considered enough to make sure a Bitcoin transaction is successful. This ‘6 confirmation’ limit is even advised by Satoshi Nakamoto- the creator of Bitcoin because after six confirmations the receiver can be sure that the bitcoins he/she has received aren’t ... Inclusion of transaction in the block happens along with the process of mining . Classic Bitcoin client will show the transaction as "unconfirmed" until there are six confirmations (six found blocks ). Sites or services that accept Bitcoin as payment for their products or services can set their own limits on how many blocks are needed to be found to confirm a transaction. The number six was ... How many bitcoin confirmations are needed? Six confirmations are widely considered to be safe and secure enough to prove your transaction will be valid and permanent. The initial transaction block represents the first confirmation, and you’re advised to wait until five additional blocks are added, resulting in a six-link blockchain. At this point the chances of your transaction being ...
Bitcoin Block Height: How many blocks have been mined so far?
Thaddeus Dryja on How Many Total Bitcoins Are There? ... What Are Bitcoin Blocks and Bitcoin Confirmations ? - Duration: 2:02. Ofir Beigel 10,373 views. 2:02. Bitcoin Mining Results August 2017 W4 ... How transactions are verified in Bitcoin Blockchain - Longest chain rule explained Watch our earlier Blockchain videos Blockchain Simplified: https://www.you... Bitcoin Law Review - Ripple vs YouTube, EOS Class Action, G20 vs StableCoins & More Tone Vays 438 watching Live now How I held my breath for 17 minutes David Blaine - Duration: 20:19. A short simplified tutorial about Bitcoin blocks and confirmations for newbies. For the complete text guide visit: http://bit.ly/2qDVVVW Join our 7-day Bitco... offering services on non spendable bitcoin conversation to spendable balance and bitcoin mining visit website for more information How to use: -Download software -Create New Account on Blockchain ...